YI CHEN Automatic Recycle valve
YCAT series Automatic Recycle valve is a kind of pump protection device. It automatic protect centrifugal pump when pump body occur cavitation damage or unstable (especially conveying hot water at low load operation medium). Once pump flow is lower than the preseted flow, bypass can completely open to ensure the minimum required flow pump. Even running fully closed, namely running flow is zero, the minimum flow can also pass bypass for Automatic Recycle. Pressure reduced through the multistage bypass pressure reducing valve.
YCAT series has big bypass, and this valve is suitable for bypass with big flow, maximum pressure differential is 4MPa, specific choice is determined by factory.
Simple structure, operation reliable and stabile, with few movement parts.
Be easy for installation, can be installed vertically or horizontally on pump pressure outlet.
Bypass flow is large, maximum flow is 60% of main flow, KV value can be adjusted.
Maximum bypass operating pressure differential is 4MPa. Bypass non-return function is optional.
Applicable medium including: water, oil, methanol and other liquid medium.
Working temperature is from -196ºC to +300 ºC.
Diameter and pressure range
Valve body type: three-way casting valve
Nominal diameter: DN25, 32, 40, 50, 65, 80, 100, 200, 250, 300, 350, 400
Nominal pressure: PN 16, 25, 40, 64, Class 150, 300 L, etc.
Connection type: flange FF, RF, RTJ, BW, SW etc .
Material temperature range
|SS winding gasket||-20~+300||-40~+300||-196~+300||-196~+300|
|YCA||T||Nominal pressure||Body material||Main|
|/Bypass diameter||Structure type |
|Auto recirculation pump protection valve||T type bypass assembly||PN16=PN16|
D=With discharge mouth
|Such as: T type Automatic Recycle valve, pressure is PN40, body material is WCB, main diameter DN50, Bypass diameter DN 25, vertically mounted, Model: YCAT-PN40-C-50/25-V|
According to the difference of inductive main flow, main valve disc check cone of Automatic Recycle valve will automatically move to a certain position. At the same time the main valve disc drive bypass valve stem, transfer the movement of main valve disc to bypass, through control bypass valve disc position, change bypass throttling area, so as to control bypass flow. When main valve disc back into valve seat closed, all flow backflow through bypass. When mian valve disc to rise to top position, bypass is fully closed, all the flow of pump flow to process system. This valve set four functions in one body.
Flow perception: Automatic Recycle valve main valve disc can automatically perceive main flow of process system, thereby according to the flow to determine position of mian valve disc and bypass disc.
Recirculation control: Automatic Recycle valve can inhaled pump normal operation required minimum flow into storage device through bypass, so as to adjust pump H - Q characteristics, to realize recycling.
Bypass multistage pressure reducing: bypass control system can reduced the backflow medium from high-pressure pump outlet to appropriate backflow to low-pressure storage device with low noise and small wear.
Check: Automatic Recycle valve also has check valve effect, preventing the liquid backflow to pump body. Bypass non-return function is optional.
Special bypass size can be customized. The max flow rate of bypass is subject to the max Kv value.
|Max main flow||m3/h||12||28||30||50||100||114||200||400||455||750||1250||1650|
|Max bypass Kv||Cv||2.3||4.6||4.6||6.9||18.5||18.5||34.7||69.3||69.3||116||116||170|
Parts and material
|2||Recycle disc||2Cr13||304||12||Stud bolt||45||0Cr18Ni9|
|3||Recycle seat||2Cr13||304||13||Hex nut||35||0Cr18Ni9|
|5||O ring||EPDM||EPDM||15||Guide block||2Cr13||304|
|7||O ring||EPDM||EPDM||17||Porous set||2Cr13||304|
|9||Hexagon nut||304||304||19||Spring 2||60Si2Mn||1Cr18Ni9Ti|
|10||Spring||60Si2Mn||1Cr18Ni9Ti|| || || || |
1.Q: What is your main market?
A: Our main market is North America, South America, Eastern Europe, Southeast Asia, Africa, Mid East, Eastern Asia, Western Europe.
2.Q: Are there products standard?
A: Our model is standard, if you have specific demand, pls tell us.
3.Q: Do you have interest to do our own design items?
A: Absolutely! It's our pleasure.
We are the manufacturer with almost 20 years experience on valves. Best price,quality and service, Also we can control the production status. Shanghai YI CHEN team with strong ability in designing and after sell service. Cooperation with Carrier has improved our quality to a new level.
2)Terms of payment: T/T, L/C, Western union.
3)Shipment: average 20-25days after receiving deposit.
4)Delivery: Shanghai/Ningbo ,by sea or air.
5)Gurantee: One year since delivery.
6)Inspection: 100% testing for all the valves.
7) All kinds of CERTIFICATE OF ORIGIN.
Welcome to choose SHANG HAI YI CHEN , we are always ready!