YI CHEN Automatic Recycle valve
YCAM series Automatic Recycle valve is a kind of pump protection device. It automatic protect centrifugal pump when pump body occur cavitation damage or unstable (especially conveying hot water at low load operation medium). Once pump flow is lower than the preseted flow, bypass can completely open to ensure the minimum required flow pump. Even running fully closed, namely running flow is zero, the minimum flow can also pass bypass for Automatic Recycle. Pressure reduced through the multistage bypass pressure reducing valve.
YCAM series is suitable for bypass with high pressure differential, maximum pressure differential is 30MPa, and specific choice is determined by factory. Multistage decompression type M type bypass can eliminate noise made by high-speed flow medium, prevent damage of cavitation erosion and braising to valve components.
Prevent cavitation multistage decompression bypass, reducing velocity, suitable for high pressure conditions
Forgde valve body, or you can choose carbon steel or stainless steel material, etc.
Standard bypass non-return function, maximum working pressure differential is 30MPa.
Pressure grade from PN16 to PN420, diameter from DN2to DN500.
Can select manual bypass operation function, used in fault.
Size and pressure range
Body type: Three-way forged valve
Nominal diameter: DN25, 32, 40, 50, 65, 80,100, 200, 250, 300, 350, 400, 450, 500
Nominal pressure: PN 16,25,40,64,100,160,250,420 CLASS 150, 300, 600, 900, 1500, 2500LB
End connection: Flange, FF, RF, RTJ, BW, SW etc.
Material temperature range
|Stainless steel gasket||-20~+300||-40~+300||-196~+300||-196~+300|
According to the difference of inductive main flow, main valve disc check cone of Automatic Recycle valve will automatically move to a certain position. At the same time the main valve disc drive bypass valve stem, transfer the movement of main valve disc to bypass, through control bypass valve disc position, change bypass throttling area, so as to control bypass flow. When main valve disc back into valve seat closed, all flow backflow through bypass. When mian valve disc to rise to top position, bypass is fully closed, all the flow of pump flow to process system. This valve set four functions in one body.
Flow perception: Automatic Recycle valve main valve disc can automatically perceive main flow of process system, thereby according to the flow to determine position of mian valve disc and bypass disc.
Recirculation control: Automatic Recycle valve can inhaled pump normal operation required minimum flow into storage device through bypass, so as to adjust pump H - Q characteristics, to realize recycling.
Bypass multistage pressure reducing: bypass control system can reduced the backflow medium from high-pressure pump outlet to appropriate backflow to low-pressure storage device with low noise small wear.
Check: Automatic Recycle valve also has check valve effect, preventing the liquid backflow to pump body. Bypass non return function is standard.
Special bypass size can be customized. The max flow rate of bypass is subject to the max Kv value.
|Max main flow||m3/h||12||28||30||50||100||114||200||400||455||750||1250||1650|
|Max bypass Kv||Cv||1.0||1.9||1.9||2.7||5.2||5.2||8.5||8.5||11||14||22||35|
Note: Valve mian ouelet size depends on the outlet size of pump.
|YCA||M||Nominal pressure||Body material||Nominal diameter||/Bypass diameter|
|Automatic Recycle pump protection valve||M type bypass assembly||PN16=PN16|
|DN25=25 NPS1"=1"||V = vertically mounted|
H = horizontally mounted
S = Manual startup
|Such as: M Automatic Recycle valve, PN40,body material is WCB,main diameter DN50 bypass diameter DN25,(vertically mounted, Model: YCAM-PN40-C-50/25-V|| |
| || || || || || || || |
Other bypass size can be made according to client's requirements, maximum bypass flow depends on maximum Kv value.
Automatic Recycle valve should be installed nearby the centrifugal pump need Protect as soon as possible, and be better to install the outlet of pump.
Distance between pump outlet and inlet should not exceed 1.5 meters, in order to preventing from liquid pulsing cause low-frequency water attack. Medium flows from top to bottom. Priority should be installed vertically, also can be installed horizontally.
Maintenance and installation according manual provided, inspect the pump weekly in routine, and at the same time inspect valve functions.
Main parts and dimension
|3||Guide ring||2Cr13||304||18||O ring||EPDM||EPDM|
|4||Valve plunger||2Cr13||304||19||Elastic cylindrical pin||2Cr13||304|
|6||O ring||EPDM||EPDM||21||O ring||EPDM||EPDM|
|7||Guide block||2Cr13||304||22||Recycle body||A105||F304|
|11||Plunger pin||2Cr13||304||26||Orifice plate||2Cr13||304|
|12||Disc block||2Cr13||304||27||O ring||EPDM||EPDM|
|15||Nut||0Cr18Ni9||0Cr18Ni9|| || || || |
1.Q: What is your main market?
A: Our main market is North America, South America, Eastern Europe, Southeast Asia, Africa, Mid East, Eastern Asia, Western Europe.
2.Q: Are there products standard?
A: Our model is standard, if you have specific demand, pls tell us.
3.Q: Do you have interest to do our own design items?
A: Absolutely! It's our pleasure.
We are the manufacturer with almost 20 years experience on valves. Best price,quality and service, Also we can control the production status. Shanghai YI CHEN team with strong ability in designing and after sell service. Cooperation with Carrier has improved our quality to a new level.
2)Terms of payment: T/T, L/C, Western union.
3)Shipment: average 20-25days after receiving deposit.
4)Delivery: Shanghai/Ningbo ,by sea or air.
5)Gurantee: One year since delivery.
6)Inspection: 100% testing for all the valves.
7) All kinds of CERTIFICATE OF ORIGIN.
Welcome to choose SHANG HAI YI CHEN , we are always ready!